What to Expect During the Ceramic Coating Process

Ceramic Coating Process

Do you get tired of constantly waxing and polishing your car, then have to repeat it within weeks as that shin returns? Well, you’re not alone. As many of the car owners know, they face it.

However, fret not because there is a viable solution that’s rapidly becoming the trend in the automotive industry  ceramic coating.

However, Ceramic coating is a liquid polymer – applied on the outer surface of vehicles to prevent damage due to external elements. It forms a barrier against dirt, water, UV rays, and other contaminants in the environment.

If you’re considering a car wrap Saskatoon, it’s essential to understand the process and benefits it offers for your vehicle’s appearance and protection.

To get ceramic coating for your car, here’s what you can expect during the process.


Before applying the ceramic coating, your car will need to undergo thorough preparation. This involves washing and cleaning the exterior to remove any dirt, grime, or existing wax layers.

The goal is to ensure that the surface is as clean and smooth as possible to allow the ceramic coating to adhere properly.

Once the car is thoroughly washed and dried, it’s important to inspect the surface for any imperfections such as scratches, swirl marks, or paint chips.

These imperfections should be corrected before applying the ceramic coating to ensure that the surface is in the best possible condition.


Even after washing, there may still be contaminants on the surface of your car that are not visible to the naked eye. These could include industrial fallout, tar, or tree sap.

To remove these contaminants, the next step in the process is decontamination. This is usually done with the aid of a clay bar or other specialized product to softly lift and remove any embedded particles.

When talking about car maintenance, decontamination is evident and this aids in preserving the appearance of your vehicle while also elongating the life span between two bodyworks.

It also guarantees that the surface is level and should not have any contaminants that could over time develop damage.

Paint Correction

If your car does contain any imperfections like swirl marks, scratches, or oxidation then you have to deal with them first before the application of ceramic coating.

Paint correction is performed by applying abrasive polishes and compounds that are used to level out the panel surface, reestablishing clarity’ and gloss to the paintwork.

This phase is critically important to getting the optimal outcome with a ceramic coating. It takes a lot of time, expertise, and experience to repair paint. Make sure the surface of your car is all out of defects before doing the ceramic coating.


Once the surface of your car is properly cleaned, decontaminated, and corrected, it’s time for the ceramic coating Saskatoon to be applied.

This is usually done by hand using an applicator pad or microfiber cloth. The ceramic coating is spread evenly over the surface of the car, forming a thin, transparent layer.


It takes time for the ceramic coating to cure and fuse with the paintwork after it is applied. Depending on the product being used and additional variables like humidity and air temperature, this often takes 24 to 48 hours.

During this time, it’s important to keep your car away from water or moisture to allow the coating to cure properly.

Final Inspection

A final examination is carried out once the ceramic coating has been completely set to confirm that the treatment was successful and that the required degree of protection and shine has been attained.

Any remaining residues or smudges are carefully removed, and the car is given a final wipe-down to reveal its glossy finish.


Congratulations, your car is now protected with a ceramic coating! But the process doesn’t end here. To maintain the longevity of the coating and keep your car looking its best, it’s important to follow a regular maintenance routine.

This may include washing your car regularly with pH-neutral shampoo, avoiding harsh chemicals or abrasive cleaning methods, and periodically applying a ceramic coating booster to enhance and prolong its protective properties.

The Blog’s Conclusion

The ceramic coating process involves thorough preparation, application, and curing to provide your car with long-lasting protection and a showroom-worthy shine.

While it may require some time and effort upfront, the benefits of ceramic coating are well worth it for any car enthusiast looking to keep their vehicle looking its best for years to come.

So, if you’re tired of constantly battling with wax and polish, consider giving ceramic coating a try – your car will thank you for it!

By understanding each step of the ceramic coating process, you can make an informed decision about whether it’s the right choice for your vehicle.

Your car’s appearance can be prolonged and years of protection can be obtained with ceramic coating with the right upkeep. Why then wait? Invest in ceramic coating for your car today to give it the protection it deserves!